How to make gloves (convertible mitten tutorial)

 Fariba /  / October 2, 2017

Hey guys! It’s been a long time since I decided to make this tutorial. By so far it has been my longest tutorial. To make it easy to navigate through each section, I divided the tutorial into five parts. Part 1 covers: how to start the glove and do cuff and the palm loop, part 2 covers: marking the thumb line, part 3 covers: how to make fingers, part 4 covers: how to make thumb itself, and part 5 covers: how to make flip cups and finishing.

Materials:
The material that you will need to make these mittens are:

  1. medium size yarn (number 4 in US sizing)-preferably wool yarn
  2. number 2.5 mm needles (number 1 in US sizing) + another Spare needle almost the same size
  3. pair of scissors
  4. piece of scrap yarn
  5. large eye blunt needle
  6. big safety pin or stitch holder
  7. measuring tape
  8. some buttons

Sizing:



The given size for this tutorial is small and you need to cast on 48 stitches for small size. For any size larger than that, you will need to add multiple of 8 stitches to 48, and for any size smaller, you will need to deduct multiple of 8 stitches from 48 stitches. For example; for a medium size you need to add 8 stitches to 48 stitches, which adds up to 56 stitches, and then prorated extra stitches on fingers.

Part 1

Cast on:
48 stitches for small glove

Cuff:
Work on a Rib stitch for about 3 inch. (ex: rep*(K2, P2))

Loop technique for palm:
After finishing the Rib stitch you will need to make a loop to create the glove palm.
For this technique you get the spare needle and divide stitches into two equal parts by sliding half of stitches from left needle to the right needle. Then fold the piece in half and hold them in your left hand, get the third needle and slip one stitch at a time from each needle in the left hand to the right hand, alternately, and preferably starting from front needle. (see important note below)

NOTE 1: This is very important to remember which needle you slip the first stitch from, because in the following rows your instruction will rely on that stitch. Having even number of stitches, if you get the first stitch from front needle, then in following rows your instruction will be repeating (K1, Sl1) for all rows, if you slip the first stitch from back needle, then your instruction for all following rows will be repeating (Sl1, K1) instead of (K1, Sl1). If you miss this note you will not be able to make a loop and your piece will be a flat fabric instead of loop! 

Next, you are going to repeat (K1, Sl1) for all following rows if you slip the first stitch from front needle when slipping stitches, or (Sl1, K1) for all following rows if you slip the fist stitch from back needle when slipping stitches, and you must MOVE the yarn to the front before slipping the stitch.
Let say you slip the first stitch from front needle when slipping stitches, then you will repeat (K1, Sl). In that case you will see that the first stitch is free and the working yarn is connected to the next stitch. Insert the tip of right needle into the first stitch and grab the string from the second stitch and knit it, then move the string to the front and slip the second stitch to the right needle. You are going to repeat (K1, Sl) for the rest. (see important note 1&2)

NOTE 2: It is important to move your working yarn between stitches otherwise your piece will be a flat fabric instead of loop!

You need to repeat knitting with this instruction until your piece measures 2.5 inch. Then you will mark some stitches from the row that your thumb will be made on it later.

What is next:
Go to part 2: marking the thumb line

Other links:
Part 3: how to make fingers
Part 4: how to make thumb
Part 5: how to make flip cups and finishing 

 

 

13 thoughts on “How to make gloves (convertible mitten tutorial)”

  1. Danielle says:

    Love your tutorial. On the written instructions it says size 3 us but on YouTube you say size 1. Can you advise which it is?

    Thanks

    1. Fariba says:

      Hi Danielle,

      Good catch! Thank you for reminding me. Yes I corrected it in my YouTube but forgot to correct in the website. I will do it right now. So the correct answer would be: number 1 in US sizing (2.5 mm).

  2. Shannon says:

    Do you have instructions for fingering weight yarn? I really want to make some to match a hat & love your tutorial. Thanks!

    1. Fariba says:

      Hi Shannon,
      Thank you for your comment. I have couple of patterns worked with fine yarn that would be similar to fingering weight yarn, you can check out couple of them here. Hope they help you.

      Flower lace stitch: https://www.watchknitting.com/2016/02/pattern-26-watch-knitting-flower-lace-skilled-lace-stitches/
      Puff stitch: https://www.watchknitting.com/2017/02/how-to-knit-a-slouchy-toque-with-puff-rib-stitch/
      Vine stitch: https://www.watchknitting.com/2017/06/vine-stitch-stitch-27/
      Dandelion stitch: https://www.watchknitting.com/2018/01/slouchy-toque-tutorial/

  3. Rayees says:

    Hello there
    Love you tutorial done so well easy to understand
    Thank you so much take care

  4. Daria says:

    Hello,

    Thank you for this very detailed and interesting tutorial. It’s the first I found that I can actually follow and started knitting a glove. However, I can’t find part 2 (or the rest of them) anywhere. The link above takes me to a 404 page. Could you check on that, please? Now I’m stuck at the thumb, cause I don’t know what to do without your competent advice :)

    1. Fariba says:

      Hi Daria,
      Sorry for any inconvenience caused by technical issues, and thank you for letting me know about this. We corrected the links and you can navigate through pages. Also you have access to the rest of tutorials from “patterns & projects” tab on top menu. Again thank you for your interest, I wish you happy knitting hours.

  5. LiliS says:

    Hi~
    It is a great tutorial. Thank you so much for sharing.
    I was wondering how much yarn I need for a pair of gloves? They must be my first knitting project.
    Thank you!

    1. Fariba says:

      Hi LiliS,
      Thank you for leaving your comment. I am glad you liked it.
      For a pair of gloves you will need about 55~65 grams of yarn. You need to cast on multiple of 4 stitches, maintaining the minimum of 48 sts, for the pattern with fingers or half fingers.
      Keep posting about your progress :)
      Best of luck!

  6. Petko says:

    Hello, i would like to know what is the gauge ?

    1. Fariba says:

      The given size for this tutorial is small and you need to cast on 48 stitches for small size. For any size larger than that, you will need to add multiple of 8 stitches to 48, and for any size smaller, you will need to deduct multiple of 8 stitches from 48 stitches. For example; for a medium size you need to add 8 stitches to 48 stitches, which adds up to 56 stitches, and then prorated extra stitches on fingers.

  7. Amanda says:

    Hi
    I LOVE LOVE your step by step detailed tutorials and downloaded all 5 of them including the written instructions and cannot wait to start but I’m a it confused with regards to the yarn you used ( medium size yarn (number 4 in US sizing)-preferably wool yarn) I am in South Africa so we have the Baby yarn, Double Knit and Chunky. Please can you advise which
    ones to use for this project.
    T. I. A

    1. Fariba says:

      Hi Amanda,
      Very happy to read your comment. Regarding the yarn size, the medium size goes as Medium- or worsted-weight, afghan, Aran, if you couldn’t find any of those between double knit and chunky, the double knit makes more sense to be used for gloves, however you would need to cast on a little bit more to adjust the stitches, make sure to increase the number of cast on in multiple of 8. Wish you all the bests :)

Leave a Reply to Fariba Cancel reply

Your email address will not be published. Required fields are marked *

My name is Fariba. Knitting is my passion since I was a little kid.

Popular Posts

Categories

Free knitting tutorials









Top Posts & Pages

How to make gloves (convertible mitten tutorial)
Puff Rib Stitch (Constellate stitch)- stitch no.26
Two Color Brioche Stitch
Neck warmer tutorial (Horseshoe cable on circular)
Smaragd Cardigan Pattern
Vine Stitch - stitch 27
Cocoon stitch (pod stitch tutorial) - stitch 37
Marking the thumb row
Slouchy Toque tutorial Dandelion stitch
How to knit a simple beanie hat